|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR General Description The AP2115 is positive voltage regulator IC designed by CMOS process. The AP2115 has features of low dropout voltage, high output voltage accuracy and low current consumption. It consists of a voltage reference, an error amplifier, a resistor network for setting output voltage, a current limit circuit for current protection, a circuit for over temperature protection and a chip enable circuit. Thus, the AP2115 is suitable for various power sources for portable application. The AP2115 is available in standard SOT-23-5 package. AP2115 Features * * * * * * * * * * * * High Ripple Rejection: 70dB at f=1KHz Ultra Low Dropout Voltage: 0.3V Typical at IOUT=300mA Low Operation Current: 80A Typical High Line Regulation: 4mV Typical High Load Regulation: 12mV Typical IOUT=300mA at Low Temperature-drift Coefficient of Output Voltage High Output Voltage Accuracy: 2% Excellent Line Transient Response and Load Transient Response Output Voltage: 1.8V, 2.5V, 2.8V, 3.0V, 3.3V Low ESR Capacitor Compatible Wide Temperature Range: -40oC to 125oC Current and Thermal Protection Application * * * * * Mobile Phones, Cordless Phones Portable Games Cameras Portable AV Equipment Battery Powered Equipment SOT-23-5 Figure 1. Package Type of AP2115 Oct. 2005 Rev. 1. 0 1 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Pin Configuration AP2115 K Package (SOT-23-5) VOUT GND VIN 1 2 3 5 NC 4 CE/CE Figure 2. Pin Configuration of AP2115 (Top View) Pin Description Pin Number 1 2 3 4 5 Pin Name VOUT GND VIN CE/CE NC Voltage regulator output pin Ground pin Input voltage pin Active high/low enable input pin (active high for AP2115B) No connection Function Oct. 2005 Rev. 1. 0 2 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Functional Block Diagram AP2115 VIN 3 1 VOUT Over-Current Protection Over-Temperature Protection Error Amplifier CE/CE 4 Voltage Reference 2 GND Active High Version Figure 3. Functional Block Diagram of AP2115 Ordering Information AP2115 E1: Lead Free Circuit Type Blank: Tin Lead TR: Tape and Reel B: Active High (No Pull-down resistor built-in) Package K: SOT-23-5 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 2.8: Fixed Output 2.8V 3.0: Fixed Output 3.0V 3.3: Fixed Output 3.3V Oct. 2005 Rev. 1. 0 3 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Ordering Information (Continued) Package Temperature Range Part Number Tin Lead AP2115BK-1.8TR AP2115BK-2.5TR SOT-23-5 -40 to 125o C AP2115BK-2.8TR AP2115BK-3.0TR AP2115BK-3.3TR Lead Free AP2115BK-1.8TRE1 AP2115BK-2.5TRE1 AP2115BK-2.8TRE1 AP2115BK-3.0TRE1 AP2115BK-3.3TRE1 Marking ID Tin Lead K7B K7D K7F K7H K7J Lead Free E7B E7D E7F E7H E7J Packing Type Tape & Reel Tape & Reel Tape & Reel Tape & Reel Tape & Reel AP2115 BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Absolute Maximum Ratings (Note 1) Parameter Input Voltage (Note 2) Input Voltage (CE/CE Pin) Output Voltage Output Current Power Dissipation Storage Temperature Range Lead Temperature (Soldering, 10sec) ESD (Machine Model) Symbol VIN VSHDN VOUT IOUT PD TSTG TLEAD ESD Value -0.3 to 8 -0.3 to VIN+0.3 -0.3 to VIN+0.3 500 250 -65 to 150 300 200 Unit V V V mA mW oC oC V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Note 2: All voltage values are with respect to network ground terminal. Recommended Operating Conditions Parameter Input Voltage (Note 3) Operating Junction Temperature Range Symbol VIN TJ Min 2.2 -40 Max 6.5 125 Unit V o C Note 3: To calculate the minimum input voltage for maximum output current, the following formula is recommended: VIN(Min)=VOUT(Max)+VDROP(Max load) Oct. 2005 Rev. 1. 0 4 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Electrical Characteristics AP2115-1.8V Electrical Characteristics Parameter Output Voltage Output Current Current Limit Quiescent Current Ground Pin Current IGND IOUT=300mA IOUT=1mA Dropout Voltage (Note 4) VDROP IOUT=50mA IOUT=200mA IOUT=300mA Load Regulation Line Regulation CE/CE Input High Threshold CE/CE Input Low Threshold CE/CE Bias Current Shutdown Supply Current Thermal Shutdown Temperature Power Supply Ripple Rejection Output Voltage Temperature Coefficient Short Current Limit Turn-on Time (Note 5) RMS Output Noise VRLOAD VRLINE VIH VIL ISD IGSD TSD PSRR VOUT/T ILIMIT TON VNOISE TA=25oC 10Hzf100kHz Ripple 0.5VP-P f=1kHz, IOUT=30mA IOUT=30mA -40 CTJ 125 C VOUT=0V o o AP2115 VIN=VOUT+1V, TA=25oC, CIN=1F, CL=1F, unless otherwise specified. Symbol VOUT IOUT Conditions 1mA IOUT 30mA Min 1.764 300 500 80 90 400 400 400 600 7.2 4 1.5 0.4 100 VOUT=0V 0.1 165 70 180 450 60 200 1 150 150 600 600 600 900 18 15 mV mV V V nA A oC Typ 1.8 Max 1.836 Unit V mA mA A A mV 1mA IOUT 300mA VOUT+0.5VVIN 6V IOUT=30mA dB V/oC mA s Vrms Note 4: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 98% of its nominal value which is measured at VOUT+1V applied to VIN. The 1.8V version dropout voltage is limited by the input voltage range. Note 5: Turn-on time is time measured between the enable input just exceeding VIH and the output voltage just reaching 95% of its nominal value. Oct. 2005 Rev. 1. 0 5 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Electrical Characteristics (Continued) AP2115-2.5V Electrical Characteristics Parameter Output Voltage Output Current Current Limit Quiescent Current Ground Pin Current IGND IOUT=300mA IOUT=1mA Dropout Voltage (Note 4) VDROP IOUT=50mA IOUT=200mA IOUT=300mA Load Regulation Line Regulation CE/CE Input High Threshold CE/CE Input Low Threshold CE/CE Bias Current Shutdown Supply Current Thermal Shutdown Temperature Power Supply Ripple Rejection Output Voltage Temperature Coefficient Short Current Limit Turn-on Time (Note 5) RMS Output Noise VRLOAD VRLINE VIH VIL ISD IGSD TSD PSRR VOUT/T ILIMIT TON VNOISE TA=25oC 10Hzf100kHz Ripple 0.5VP-P f=1kHz, IOUT=30mA IOUT=30mA -40oCTJ125oC VOUT=0V 450 60 200 mA s Vrms VOUT=0V 0.1 165 70 250 1mA IOUT300mA VOUT+0.5VVIN 6V IOUT=30mA 1.5 0.4 100 1 Symbol VOUT IOUT AP2115 VIN=VOUT+1V, TA=25oC, CIN=1F, CL=1F, unless otherwise specified. Conditions 1mA IOUT 30mA Min 2.45 300 500 80 90 1 50 200 300 10 4 150 150 5 75 300 450 25 15 mV mV V V nA A oC Typ 2.5 Max 2.55 Unit V mA mA A A mV dB V/oC Note 4: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 98% of its nominal value which is measured at VOUT+1V applied to VIN. Note 5: Turn-on time is time measured between the enable input just exceeding VIH and the output voltage just reaching 95% of its nominal value. Oct. 2005 Rev. 1. 0 6 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Electrical Characteristics (Continued) AP2115-2.8V Electrical Characteristics Parameter Output Voltage Output Current Current Limit Quiescent Current Ground Pin Current IGND IOUT=300mA IOUT=1mA Dropout Voltage (Note 4) VDROP IOUT=50mA IOUT=200mA IOUT=300mA Load Regulation Line Regulation CE/CE Input High Threshold CE/CE Input Low Threshold CE/CE Bias Current Shutdown Supply Current Thermal Shutdown Temperature Power Supply Ripple Rejection Output Voltage Temperature Coefficient Short Current Limit Turn-on Time (Note 5) RMS Output Noise VRLOAD VRLINE VIH VIL ISD IGSD TSD PSRR VOUT/T ILIMIT TON VNOISE TA=25oC 10Hzf 100kHz Ripple 0.5VP-P f=1kHz, IOUT=30mA IOUT=30mA -40oCTJ125oC VOUT=0V 450 60 200 mA s Vrms VOUT=0V 0.1 165 70 280 1mA IOUT300mA VOUT+0.5VVIN6V IOUT=30mA 1.5 0.4 100 1 Symbol VOUT IOUT AP2115 VIN=VOUT+1V, TA=25oC, CIN=1F, CL=1F, unless otherwise specified. Conditions 1mA IOUT 30mA Min 2.744 300 500 80 90 1 50 200 300 11.2 4 150 150 5 75 300 450 28 15 mV mV V V nA A oC Typ 2.8 Max 2.856 Unit V mA mA A A mV dB V/oC Note 4: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 98% of its nominal value which is measured at VOUT+1V applied to VIN. Note 5: Turn-on time is time measured between the enable input just exceeding VIH and the output voltage just reaching 95% of its nominal value. Oct. 2005 Rev. 1. 0 7 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Electrical Characteristics (Continued) AP2115-3.0V Electrical Characteristics Parameter Output Voltage Output Current Current Limit Quiescent Current Ground Pin Current IGND IOUT=300mA IOUT=1mA Dropout Voltage (Note 4) VDROP IOUT=50mA IOUT=200mA IOUT=300mA Load Regulation Line Regulation CE/CE Input High Threshold CE/CE Input Low Threshold CE/CE Bias Current Shutdown Supply Current Thermal Shutdown Temperature Power Supply Ripple Rejection Output Voltage Temperature Coefficient Short Current Limit Turn-on Time (Note 5) RMS Output Noise VRLOAD VRLINE VIH VIL ISD IGSD TSD PSRR VOUT/T ILIMIT TON VNOISE TA=25oC 10Hzf100kHz Ripple 0.5VP-P f=1kHz, IOUT=30mA IOUT=30mA -40oCTJ125oC VOUT=0V 450 60 200 mA s Vrms VOUT=0V 0.1 165 70 300 1mAIOUT300mA VOUT+0.5VVIN6V IOUT=30mA 1.5 0.4 100 1 Symbol VOUT IOUT AP2115 VIN=VOUT+1V, TA=25oC, CIN=1F, CL=1F, unless otherwise specified. Conditions 1mA IOUT30mA Min 2.94 300 500 80 90 1 50 200 300 12 4 150 150 5 75 300 450 30 15 mV mV V V nA A oC Typ 3.0 Max 3.06 Unit V mA mA A A mV dB V/oC Note 4: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 98% of its nominal value which is measured at VOUT+1V applied to VIN. Note 5: Turn-on time is time measured between the enable input just exceeding VIH and the output voltage just reaching 95% of its nominal value. Oct. 2005 Rev. 1. 0 8 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Electrical Characteristics (Continued) AP2115-3.3V Electrical Characteristics Parameter Output Voltage Output Current Current Limit Quiescent Current Ground Pin Current IGND IOUT=300mA IOUT=1mA Dropout Voltage (Note 4) VDROP IOUT=50mA IOUT=200mA IOUT=300mA Load Regulation Line Regulation CE/CE Input High Threshold CE/CE Input Low Threshold CE/CE Bias Current Shutdown Supply Current Thermal Shutdown Temperature Power Supply Ripple Rejection Output Voltage Temperature Coefficient Short Current Limit Turn-on Time (Note 5) RMS Output Noise VRLOAD VRLINE VIH VIL ISD IGSD TSD PSRR VOUT/T ILIMIT TON VNOISE TA=25oC 10Hzf100kHz Ripple 0.5VP-P f=1kHz, IOUT=30mA IOUT=30mA -40oCTJ125oC VOUT=0V 450 60 200 mA s Vrms VOUT=0V 0.1 165 70 330 1mA IOUT300mA VOUT+0.5VVIN6V IOUT=30mA 1.5 0.4 100 1 Symbol VOUT IOUT AP2115 VIN=VOUT+1V, TA=25oC, CIN=1F, CL=1F, unless otherwise specified. Conditions 1mA IOUT30mA Min 3.234 300 500 80 90 1 50 200 300 13.2 4 150 150 5 75 300 450 33 15 mV mV V V nA A oC Typ 3.3 Max 3.366 Unit V mA mA A A mV dB V/oC Note 4: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 98% of its nominal value which is measured at VOUT+1V applied to VIN. Note 5: Turn-on time is time measured between the enable input just exceeding VIH and the output voltage just reaching 95% of its nominal value. Oct. 2005 Rev. 1. 0 9 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Typical Performance Characteristics AP2115 2.0 3.0 1.8 1.6 Output Voltage (V) Output Voltage (V) 2.5 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 1 2 3 4 5 6 7 8 2.0 AP2115-3.0V O TA=25 C 1.5 IOUT=10mA IOUT=200mA AP2115-1.8V o TA=25 C IOUT=10mA 1.0 0 1 2 3 4 5 6 Input Voltage (V) Input Voltage (V) Figure 4. Output Voltage vs. Input Voltage Figure 5. Output Voltage vs. Input Voltage 3.10 3.08 3.06 1.900 1.875 1.850 Output Voltage (V) Output Voltage (V) 3.04 3.02 3.00 2.98 2.96 2.94 2.92 2.90 -40 1.825 1.800 1.775 1.750 1.725 1.700 AP2115-3.0V VIN=4V IOUT=1mA -20 0 20 40 60 o AP2115-1.8V VIN=4V IOUT=10mA -40 -20 0 20 40 60 80 O 80 100 120 100 120 Ambient Temperature ( C) Ambient Temperature ( C) Figure 6. Output Voltage vs. Temperature Figure 7. Output Voltage vs. Temperature Oct. 2005 Rev. 1. 0 10 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Typical Performance Characteristics AP2115 0.30 100 80 0.25 Supply Current (A) 60 Dropout Voltage (V) AP2115-3.0V O TA=25 C 0.20 40 0.15 20 AP2115-3.0V IOUT=200mA 0.10 -40 0 1 2 3 4 5 6 -20 0 20 40 60 o 80 100 120 Input Voltage (V) Ambient Temperature ( C) Figure 8. Input Voltage vs. Supply Current (No Load) Figure 9. Dropout Voltage vs. Ambient Temperature 350 325 300 275 600 500 Dropout Voltage (mV) 225 200 175 150 125 100 75 50 25 0 0 25 50 75 100 125 150 175 200 225 250 275 300 Dropout Voltage (mV) 250 400 300 200 AP2115-3.0V O TA=25 C 100 AP2115-1.8V o TA=25 C 0 0 100 200 300 Output Current (mA) Output Current (mA) Figure 10. Dropout Voltage vs. Output Current Figure 11. Dropout Voltage vs. Output Current Oct. 2005 Rev. 1. 0 11 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Typical Performance Characteristics (Continued) AP2115 90 3.0 2.5 80 Ripple Rejection (dB) Output Voltage (V) 2.0 70 1.5 60 50 AP2115-3.0V VIN=4V IOUT=30mA TA=25 C O 1.0 0.5 AP2115-3.0V VIN=4V IOUT=1mA 40 0.0 30 10 100 1000 10000 100000 100 110 120 130 140 150 o 160 170 180 Frequency (Hz) Ambient Temperature ( C) Figure 12. Ripple Rejection vs. Frequency Figure 13. Output Voltage vs. Ambient Temperature Output Current VIN=4.0V Change of Output Voltage Change of Output Voltage Input Voltage IOUT=30mA Figure 14. Load Transient Figure 15. Line Transient Oct. 2005 Rev. 1. 0 12 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Typical Performance Characteristics (Continued) AP2115 Change of Output Voltage Input Voltage IOUT=300mA Figure 16. Line Transient Oct. 2005 Rev. 1. 0 13 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Typical Application AP2115 VOUT 1 VOUT NC 5 2 GND VIN C IN 1F COUT 1F 3 VIN CE/CE 4 CE/CE Figure 17. Typical Application of AP2115 Note: Filter capacitors are required at the AP2115's input and output. 1F capacitors are required at the input. The minimum output capacitance required for stability should be1F with ESR from 0.1 to 10. Oct. 2005 Rev. 1. 0 14 BCD Semiconductor Manufacturing Limited Preliminary Datasheet 300mA FIXED OUTPUT VOLTAGE LDO REGULATOR Mechanical Dimensions SOT-23-5 Unit: mm(inch) AP2115 2.820(0.111) 3.020(0.119) 0.100(0.004) 0.200(0.008) 2.650(0.104) 2.950(0.116) 1.500(0.059) 1.700(0.067) 0.200(0.008) 0.700(0.028) REF 0.950(0.037) TYP 0.300(0.012) 0.400(0.016) 1.800(0.071) 2.000(0.079) 0.300(0.012) 0.600(0.024) 0 8 1.050(0.041) 1.250(0.049) 0.000(0.000) 0.100(0.004) 1.050(0.041) 1.150(0.045) Oct. 2005 Rev. 1. 0 15 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD Semiconductor Manufacturing Limited - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 BCD Semiconductor Manufacturing Limited - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 27B, Tower C, 2070, Middle Shen Nan Road, Shenzhen 518031, China Tel: +86-755-8368 3987, Fax: +86-755-8368 3166 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808, Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 3170 De La Cruz Blvd., Suite 105, Santa Clara, CA 95054-2411, U.S.A Tel: +1-408-988 6388, Fax: +1-408-988 6386 |
Price & Availability of AP2115BK-33TRE1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |